PUT   checks/browser/{checkId}

Updates a browser check.

URL Parameters

Name	Description
checkId	Check identifier. Type: numeric.

Remarks

Thresholds

There is a set of properties (each starts with threshold_) used for thresholds definition. Read more on thresholds here.

Scheduled Inclusion/Exclusion

The scheduled_inclusion and scheduled_exclusion parameters define specific day/time ranges when the check will run or not run respectively.
Set empty string to reset the value. Read more on the schedule syntax here.

Interval

The interval_seconds field defines the frequency of running check. Set interval_seconds = 0 if the check should run manually.

Request example and description

curl --request PUT "https://api-asm1.apica.io/v3/checks/browser/12345?auth_ticket=C471ADC4-19B4-4219-BBF4-671A97EC653E" --header "Content-Type: application/json" --data-raw "{
  "url": "sample string 1",
  "result_mode": 0,
  "custom_hdrs": {
    "X-check-id": "%CHECK_ID%",
    "X-private-req": "true"
  },
  "block_domains": [
    "sample string 1",
    "sample string 2",
    "sample string 3"
  ],
  "allow_domains": [
    "sample string 1",
    "sample string 2",
    "sample string 3"
  ],
  "stop_urls": [
    "sample string 1",
    "sample string 2",
    "sample string 3"
  ],
  "screen_resolution": "1280x1024x24",
  "screenshot_mode": "OnTransition",
  "blurring_mode": 1,
  "ignore_file_types": [
    {
      "status_codes": "404,5*",
      "types": "png,gif,jp*"
    },
    {
      "status_codes": "404,5*",
      "types": "png,gif,jp*"
    },
    {
      "status_codes": "404,5*",
      "types": "png,gif,jp*"
    }
  ],
  "ignore_mime_types": [
    {
      "status_codes": "404,5*",
      "types": "png,gif,jp*"
    },
    {
      "status_codes": "404,5*",
      "types": "png,gif,jp*"
    },
    {
      "status_codes": "404,5*",
      "types": "png,gif,jp*"
    }
  ],
  "url_severity_mapping": [
    {
      "url_format": "wildcard",
      "url": "www.example.com*",
      "status_codes": "5*, 404",
      "severity": "F"
    },
    {
      "url_format": "wildcard",
      "url": "www.example.com*",
      "status_codes": "5*, 404",
      "severity": "F"
    },
    {
      "url_format": "wildcard",
      "url": "www.example.com*",
      "status_codes": "5*, 404",
      "severity": "F"
    }
  ],
  "url_severity_mapping_preserve_time": true,
  "url_severity_mapping_error_wildcard": 0,
  "location_code": "b8dce6d7-2222-1111-92e9-4a98eb706b13|europe.northern-europe.se.na.stockholm.ipv6-aaaaa|chromium|87",
  "secondary_location_codes": null,
  "fail_over": true,
  "name": "Check name",
  "description": "Check description",
  "interval_seconds": 300,
  "max_attempts": 3,
  "attempt_pause": 30000,
  "check_fail_severity": "F",
  "threshold_w": 15000,
  "threshold_w_set_0": true,
  "threshold_w_dynamic": {
    "baseline_measure": "std",
    "baseline_period_h": 2,
    "factor": 2.0,
    "offset": 0
  },
  "threshold_e": 30000,
  "threshold_e_set_0": false,
  "threshold_e_dynamic": {
    "baseline_measure": "mdn",
    "baseline_period_h": 2,
    "factor": 2.0,
    "offset": 0
  },
  "threshold_lo_w": 5000,
  "threshold_lo_w_set_0": true,
  "threshold_lo_w_dynamic": {
    "baseline_measure": "avg",
    "baseline_period_h": 2,
    "factor": 2.0,
    "offset": 0
  },
  "threshold_lo_e": 10000,
  "threshold_lo_e_set_0": false,
  "threshold_lo_e_dynamic": {
    "baseline_measure": "std",
    "baseline_period_h": 2,
    "factor": 2.0,
    "offset": 0
  },
  "enabled": true,
  "scheduled_inclusion": "mon-fri: 21:30-22; sun:15-17; 0-1:12-18; 2012-04-01-2012-04-30:18-23",
  "scheduled_exclusion": "mon-fri: 21:30-22; sun:15-17; 0-1:12-18; 2012-04-01-2012-04-30:18-23",
  "tags": [
    1,
    2,
    3
  ],
  "target_sla": 0.9,
  "target_sla_2": 0.9,
  "verify_ping": "fast.com"
}"

Name	Type	Required	Description
url	String	No	No documentation available.
result_mode	Integer	No	Type of value to return for the check. 10 - Total Browser Render Time, 20 - Total Response Time, 30 - Total Page Size, 40 - DOM Content Loaded, 50 - DOM Complete, 60 - DOM Interactive, 70 - Compressed Size, 80 - DNS Lookup.
custom_hdrs	Object	No	Custom headers values support a set of placeholders: "%CHECK_ID%" and "%CHECK_NAME%".
block_domains	Array	No	Deny access to these URLs. Regular Expressions may be used.
allow_domains	Array	No	Allow access to these URLs. Regular Expressions may be used.
stop_urls	Array	No	Stop loading content at these URLs.
screen_resolution	String	No	Browser screen resolution to use when accessing the URL.
screenshot_mode	String	No	Screenshots triggers. Empty string - don't trigger screenshots, OnTransition - trigger only if check changes severity e.g from OK > Warning or from Fatal > OK, OnError - only trigger screenshot when severity = Fatal, Always - always store screenshots (usually for debugging only).
blurring_mode	Integer	No	Enable blurring of screen captures to obscure details. 0 - None, 1(min), 2, 3, 4(max) - blur level.
ignore_file_types	Array	No	Ignore errors returned in the response by HTTP Response Code and File Types. E.g '500, 4* - .png' = Ignore all 500 and all 4 errors for .png files (checked against the URI).
status_codes	String	Yes	Status codes. Separate with commas, asterisks are allowed.
types	String	Yes	File or MIME types that will be ignored for specified code. Separate with commas, asterisks are allowed.
ignore_mime_types	Array	No	Ignore errors returned in the response by HTTP Response Code and Mime Types. E.g '500, 4* - image/' = Ignore all 500 and all 4 errors for image/* mime types (checked against the Content-Type header).
status_codes	String	Yes	Status codes. Separate with commas, asterisks are allowed.
types	String	Yes	File or MIME types that will be ignored for specified code. Separate with commas, asterisks are allowed.
url_severity_mapping	Array	No	Specify Url Pattern, HTTP error status codes, and which severity you want to treat the error status codes as.
url_format	String	Yes	Url pattern type. Available values: 'wildcard', 'regex'.
url	String	Yes	Url pattern.
status_codes	String	Yes	Status codes. Separate with commas, asterisks are allowed.
severity	String	Yes	Treat url pattern as severity. I - Information, W - Warning, E - Error, F - Fatal. Default is F.
url_severity_mapping_preserve_time	Boolean	No	Enable this option to preserve the Returned Value for a check run with URL errors that are mapped to I, W, or E (and there is no selenium error). By default a check run with URL errors is shown as a failed check run and the Returned Value is not saved.
url_severity_mapping_error_wildcard	Integer	No	Error Status Codes pattern '*' applies to: 0 - Bad HTTP status(0, 4 *, 5 *) and any other URL error, 1 - Bad HTTP status only(0, 4 *, 5 *), 2 - Any HTTP status.
location_code	String	No	The check run location.
secondary_location_codes	Array	No	Currently not supported.
fail_over	Boolean	No	With Failover enabled the check will be executed on a second location if the result is not OK (Information). Only one attempt will be made from the failover location.
name	String	No	The name of the check.
description	String	No	The check description.
interval_seconds	Integer	No	The check run interval in seconds.
max_attempts	Integer	No	The max number of attempts that can be made to verify the results. This setting applies to the primary location only, not any failover locations. Available values: from 1 to 5.
attempt_pause	Integer	No	Between every attempt there will be an Attempt Pause before the next attempt is performed. Milliseconds. Available values : 0, 50, 100, 200, 500, 1000, 2000, 3000, 5000, 10000, 20000, 30000, 60000.
check_fail_severity	String	No	This will be the Severity that the check will get if it fails. This can be used to trigger a different Severity (and at the end, different alerts). I - Information, W - Warning, E - Error, F - Fatal. Default is F.
threshold_w	Integer	No	The value of high warning threshold.
threshold_w_set_0	Boolean	No	The flag indicating whether or not the high warning threshold should be set to 0.
threshold_w_dynamic	Object	No	The object for configuring dynamic calculation of high warning threshold.
baseline_measure	String	No	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	No	The period in hours for calculation depending on the specified baseline.
factor	Float	No	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
threshold_e	Integer	No	The value of high error threshold.
threshold_e_set_0	Boolean	No	The flag indicating whether or not the high error threshold should be set to 0.
threshold_e_dynamic	Object	No	The object for configuring dynamic calculation of high error threshold.
baseline_measure	String	No	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	No	The period in hours for calculation depending on the specified baseline.
factor	Float	No	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
threshold_lo_w	Integer	No	The value of low warning threshold.
threshold_lo_w_set_0	Boolean	No	The flag indicating whether or not the low warning threshold should be set to 0.
threshold_lo_w_dynamic	Object	No	The object for configuring dynamic calculation of low warning threshold.
baseline_measure	String	No	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	No	The period in hours for calculation depending on the specified baseline.
factor	Float	No	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
threshold_lo_e	Integer	No	The value of low error threshold.
threshold_lo_e_set_0	Boolean	No	The flag indicating whether or not the low error threshold should be set to 0.
threshold_lo_e_dynamic	Object	No	The object for configuring dynamic calculation of low error threshold.
baseline_measure	String	No	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	No	The period in hours for calculation depending on the specified baseline.
factor	Float	No	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
enabled	Boolean	No	The check enabling status.
scheduled_inclusion	String	No	Inclusion Periods (Default: always).
scheduled_exclusion	String	No	Exclusion Periods (Default: none).
tags	Array	No	List of tag IDs.
target_sla	Float	No	Sets a 1st Target SLA in percentage e.g. 99.5 or 99. This is used in certain types reports. Set 0 to reset the value.
target_sla_2	Float	No	Sets a 2nd Target SLA in percentage e.g. 99.5 or 99. This is used in certain types reports. Set 0 to reset the value.
verify_ping	String	No	After a failed result, verify connection against this hostname with a ping request.